Hushpuppy
Dr MadBud
- Joined
- Mar 26, 2011
- Messages
- 6,441
- Reaction score
- 313
So I like to make dry ice hash with all of my trim. But the one problem that I have with it is the trim can get rather dusty sometimes if I let the trim cure too long. While shaking out the resin glands, you can get a lot of fly away material that will get everywhere in the room. So I decided to build a containment of some sort to try to keep at least the larger portion of that material on the glass. Here are a couple pics of my design. The open bottom of the house sets over a sheet of glass that I got out of a storm door. I use 5gal bubble bags but I stretch them over a 3gal bucket and hang it inside the top hole. I shake the bucket down into the top hole of the house and it works ideally to hold in all of the material.
I used it this afternoon to make some hash and it worked ideally I forgot to take pics of the process or I would post them, sorry.
View attachment hash house1.jpg
View attachment hash house2.jpg
I used it this afternoon to make some hash and it worked ideally I forgot to take pics of the process or I would post them, sorry.
View attachment hash house1.jpg
View attachment hash house2.jpg