Help with wiring please

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That is very old and obsolete. Not something I would use in any way shape or form.
 
Can someone draw me a diagram for this
Furnas Class 42 Definite Purpose Contactor
Much appreciate the help

Its a 4 pole contactor.
There is no diagram needed, just wire supply voltage into the top terminals, just use any 2.
Wire your load to the bottom terminals that are straight down from the top ones you wired to.
The 110v, and it is 110v coil I checked, gets wired to the 2 screw terminals on the bottom by themselves.

There should be no problem using an obsolete/old relay as long as its in good shape. just watch for buzzing or any real heat buildup.
10s of thousands of these very same relays are in use everyday.
 
It was used in our grow before but are downsizing and this accidentally got taken down, it works well for be obsolete ;)
N thanks grow dude
 

Latest posts

Back
Top