DIY Wardrobe Grow Box

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

AZshwagg

Well-Known Member
Joined
Oct 13, 2005
Messages
506
Reaction score
45
Tools and supplies you will need:
  • Jig saw or Dremel (To cut holes)
  • Drill (To screw CPU fans/ Make guide holes)
  • Clear heavy duty tape
  • Weather Stripping
  • Poster board *Optional
  • 4' by 8' Metal duct Outlet
Equipment used in the WDGB:​
  • (2) 65 watt each emitting 4550 Photopic Lumens​
  • (2) CPU Fans​
  • (2) 6' Fans​
  • (1) Digital Temp/humidity Checker​
  • Mylar​
 
I use weather stripping the cover all the light leaks by putting it around the inside of the doors. Also, I used Clear Heavy Duty tape to tape shut all leaks along the coners of the box.

2005_0514mpmfforupdates0016.JPG
 
I used (2) Cpu Fans from "Best Buy" that are rated at 73.6 CFM each/ Combined Total of 115.2 CFM. I used a Drill to put guide holes to insert the Jig Saw Blade and cut the hole for the CPU Fans. Then I connected the (2) CPU Fans together to the same plug. The I used the 4' by 8' metal duct to let fresh air in.
* Used the Jigsaw to make all openings.

2005_0514mpmfforupdates0007.JPG


2005_0514mpmfforupdates0008.JPG


2005_0514mpmfforupdates0009.JPG


2005_0514mpmfforupdates0010.JPG


2005_0514mpmfforupdates0018.JPG


2005_0514mpmfforupdates0019.JPG
 
I drilled a hole on the top of the WD that lead into a diff. compartment were a Surge Protecter is located and all wiring is fed thru.

2005_0514mpmfforupdates0014.JPG


2005_0514mpmfforupdates0011.JPG
 
I used poster board cover light leeks around the inner part of the door. When I installed the doors there was 1\4 inch gap so I taped poster board to over lap the other door.

2005_0514mpmfforupdates0021.JPG


2005_0514mpmfforupdates0022.JPG


2005_0514mpmfforupdates0023.JPG


2005_0514mpmfforupdates0024.JPG
 
When I was applying the Mylar I noticed that doubble sided tape might have been easier to use instead of clear tape. Also when choosing a surge protector don't go cheap use one that handles alot, I had to learn the hard way. And heres the final product!!!!

2005_0514mpmfforupdates0015.JPG


2005_0514mpmfforupdates0020.JPG
 
Status
Not open for further replies.

Latest posts

Back
Top