2 Buckets, 1 Feeder Tube

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Grizzly_OKief

New Member
Joined
Mar 8, 2017
Messages
2
Reaction score
0
What up grow community! I'm looking for some help brainstorming a solution to using 2 buckets (1 nutes, 1 silica/calmag) with a single 1/2 inch feeder tube.

Currently I have a pump taking my nute mix out of a 10 gallon bucket and filling my 1/2 inch feeder tube that is running the top lip of the flood tray with twelve 1/4 inch drip lines ported off of that.

How would I go about adding a 2nd water source to the same tray without: running a 2nd feeder tube around the lip, moving the tube from pump to pump, or using manual stoppers that I switch back and forth daily to supply the alternating feedings.

Any help is greatly appreciated. Thank you!
 
Why aren't you just running the silica/calmag with the nutrients?

I don't believe what you want to do is possible without putting the 2 solutions together or running another pump and tubing.
 

Latest posts

Back
Top