AUSSIE Seeking advice on PowerFeed products

[bigBMfan1]

gday to all
50/50 perlite coir
600 watt mars hydro
unknown strain
ph 5.65-5.85 consistent
temps 22-26Deg
rh 50%-70% generally after feed it gets high then lowers
i dont do much testing of runoff

1st week of flower
i was wondering if anyone can suggest which of these products in m y cupboard to use with PK 13/14, calmagnitrate, eco seaweed, go go juice,worm castings.
which of these PowerFeed products will work best for me IYO.
peace to all

 

[user 60570]

with PK 13/14 , calmagnitrate , eco seaweed , go go juice , and worm castings , why do you think you need to add anything else?

crikey , I’ve used only worm castings and calmag from start to finish and the plants were happy

 

[bigBMfan1]

with PK 13/14 , calmagnitrate , eco seaweed , go go juice , and worm castings , why do you think you need to add anything else?

crikey , I’ve used only worm castings and calmag from start to finish and the plants were happy

yea I'm hearing you bro,my only concern was that its nitrogen was only coming from the calmagnit,what are your thoughts

 

[bigBMfan1]

with PK 13/14 , calmagnitrate , eco seaweed , go go juice , and worm castings , why do you think you need to add anything else?

crikey , I’ve used only worm castings and calmag from start to finish and the plants were happy

could i also add that if you think that is enough would you mind giving me your thoughts what the dose of each is then i wont have to spend money haha

 

[bigBMfan1]

here they are

 

[WeedHopper]

Cool trim job.

 

[user 60570]

yea I'm hearing you bro,my only concern was that its nitrogen was only coming from the calmagnit,what are your thoughts

going into flower I wouldn’t worry to much about the n , keep an eye on the plants and they will tell you if they need more

do you have access to Mullumbimby Madness?

 

[user 60570]

could i also add that if you think that is enough would you mind giving me your thoughts what the dose of each is then i wont have to spend money haha

i fed worm castings once every three days , same with calmag, I usually follow the mixing instructions on the labels of bottled products

 

[bigBMfan1]

going into flower I wouldn’t worry to much about the n , keep an eye on the plants and they will tell you if they need more

do you have access to Mullumbimby Madness?

I have a family member who lives right where that all started

 

[bigBMfan1]

Thanks for your input guys
Peace

 

[bigBMfan1]

i fed worm castings once every three days , same with Calmag, I usually follow the mixing instructions on the labels of bottled products

gday
i started feeding them worm castings every 3 days and they seem to be a nicer color,calmagnit,pk13/14 and some Seasol as tonic
i had a major **** up, I am using the pin timer, so i flipped them and on day 28 i found 1 , 15 minute pin on light so they had been getting 15 minutes of light during tne night and i was wondering why they seem to be still veg'ing so any way after eliminating 1 thing at a time and well-found the problem.
so i have no idea where i am at at the moment
I've attached some pics for any advice on moving forward.
i am fairly happy with them just cant wait to see some white lightning.
cheers bgro and happy easter to all

 

[ROSTERMAN]

Happy Easter to you too

Question you flipped to flower when, and are you on 12 12 light cycle now (12hrs lights on 12 hrs lights off?)

 

[bigBMfan1]

sorry pics are not that good my ph. isn't the best.

Happy Easter to you too

Question you flipped to flower when, and are you on 12 12 light cycle now (12hrs lights on 12 hrs lights off?)

yea yea i flipped 30 odd days ago but when i still had nopt seen 1 white hair i started to worry so i looked and found that since i flipped i had 1 pin down which is 15 minutes , well they were getting 15 minutes of light during 12 hour bed time so that was about 2 weeks a go maybe less ,so yes i fixed the pin ( fkn idiot i am )and yes still on 12/12 but now i have no idea what day im at etc etc

 

[ROSTERMAN]

OK so they were getting a extra 15mins of light or just sometime during the dark period due to the 15 min pin
your plants are confused and most likely stressed now , prob still in veg.
I would drop the lights to 11hrs on and 13 off .

 

[bigBMfan1]

Happy Easter to you too

Question you flipped to flower when, and are you on 12 12 light cycle now (12hrs lights on 12 hrs lights off?)

coco/perlite
600 watt mars hydro
heaps airflow
good exhaust
ph during veg 5.65-5.85
nopw ph at 5.9
3 fans
i feed 1 feed a day at 6 am in the morning
calmagnit,pk 13/14,seasol (very little)
worm castings
i have some gogo juice and nitrosol but im trying to lay off the "n"if i can
so yea thats about it

 

[bigBMfan1]

OK so they were getting a extra 15mins of light or just sometime during the dark period due to the 15 min pin
your plants are confused and most likely stressed now , prob still in veg.
I would drop the lights to 11hrs on and 13 off .

sounds like a plan, i will do just that, in morning, you might be onto something.
i mix up a 20 ltre tub each week with 30 mls calmagnit, 20 mls pk 13/14, 10 mls seasol tonic.and some worm castings here and there.

btw have you used worm castings,i just put 2 tablespoons in a litre of water and give 250 mls each

 

[bigBMfan1]

OK so they were getting a extra 15mins of light or just sometime during the dark period due to the 15 min pin
your plants are confused and most likely stressed now , prob still in veg.
I would drop the lights to 11hrs on and 13 off .

i must confess that this is my 3 rd. grow and i have never really concentrated properly on nutes,ppm,ec until now and i am a pensioner so i can only afford bottom end products,i just dont want to lose these girls thats all

 

[ROSTERMAN]

coco/perlite
600 watt mars hydro
heaps airflow
good exhaust
ph during veg 5.65-5.85
nopw ph at 5.9
3 fans
i feed 1 feed a day at 6 am in the morning
calmagnit,pk 13/14,seasol (very little)
worm castings
i have some gogo juice and nitrosol but im trying to lay off the "n"if i can
so yea thats about it

That should grow weed fine
do not let the coco ever dry out by missing a day, do you have pearlite mixed in with the coco?
I would just adjust the lights and focus on flower feeding now.
You may be in for a big plant

 

[ROSTERMAN]

I use to use a Mars Hydro 1600 work pretty good , but the diodes will burn out if room temp get to high.

 

[bigBMfan1]

I use to use a Mars Hydro 1600 work pretty good , but the diodes will burn out if room temp get to high.

cheers bro
thanks for your help
is it cool to follow you