Advertise On Marijuana Passion

Disclaimer..

Status
Not open for further replies.

Hick

Git "R" lit
Joined
Apr 19, 2005
Messages
12,836
Reaction score
12,666
DISCLAIMER: Makeing Hash Oil useing solvents or compressed gas, provides an oppurtunity for explosion and/or fire. NEVER use an open flame for the evaporation step in reduce the tincature down to a useable product. NEVER expose an open flame or spark nearby at anytime during the 'extraction' process.
All Hash Oil made with these process's will also contain some residual components of the solvent used. That residue may contain carcinogens or other harmfull compounds.

c/p from CC


Hash oil explosions
by Reverend Damuzi (14 Sept, 2004) Using solvents to make oil can be a killer experience!

Making hash oil can be fun, but it can also be hazardous to your health. The oil or hash itself is not dangerous, it's the explosive solvents that are often used to make them.
Butane is one of the chief culprits. Butane is commonly used to make hash oil using a method that involves injecting the butane into a sealed container with bud so the solvent can absorb cannabinoids.

The solvent/cannabinoid mix is captured, and then the butane is evaporated from the mix, theoretically leaving only pure pot product behind.

During the process, even a single spark can set off an explosion. Butane, which is heavier than air, can flow out of leaky containers and pool invisibly, awaiting the lighting of a cigarette, joint or bong. It can also travel unseen along surfaces until it reaches a source of ignition and explodes. Because butane displaces oxygen, it can even cause asphyxia if it fills up a room.

The allure of butane is that it is cheap and easy to get. There are relatively safe products on the market that use butane, like the Honeybee Extractor, but extreme caution must always be taken with butane and other solvents, regardless of the method used.

An experienced hash oil maker offered Cannabis Culture readers a few tips:

"Never use butane, or any solvent, in an enclosed, unventilated space. Outdoors is best, but lots of fans and open windows can also work. Put fans right at the windows and ensure that there is nowhere the gas can pool. The more air flow the better."

The anonymous oil maker added that you shouldn't heat your product to speed evaporation of the solvents, and to be sure to stay well away from any sources of ignition. "Remember that any small spark can be a source of ignition, and this includes a cell phone, a refrigerator, or any other electrical device."

The expert also advised doing residue tests on various brands of solvents before using them, as some contain toxic chemicals that could be left behind after the evaporation process. "They don't make butane with human consumption in mind," he explained.

"Better yet," concluded the expert, "get a Bubble Bag or Ice-o-lator, which use only water, and leave the hash oil extraction labs to the experts."

While cops seize upon oil lab explosions as another example of cannabis' supposed harm, it is well to keep in mind that butane has also been known to explode in disposable lighters, canned flat tire re-inflation devices, and even during transport in large tanks, causing numerous deaths. Keep yourself alive, and don't give authorities more reason to demonize the weed. Make your oil or hash safely!
 
Status
Not open for further replies.

Latest posts

Top