Hella Jelly grow

[Ganjier]

Welcome to the jungle!

 

[Lesso]

Today ends week 1.
Start week 2.
Adding 2ml per gallon pk booster. I have some leftover tps flower. I don't need massive amounts of it especially this early

 

[EbbnFlowr]

Nice man I can't wait to learn all about cloning and keeping mom's etc.....super dope grow man following for sure

 

[EbbnFlowr]

Added a 8 inch fan and filter. Controller 69 pro, one more oscillating fan and will have them and the blower all hooked to the controller. I can't do the lights just yet because the sp250 won't daisy with the big light. No biggie.
I also replaced an old brokenish vivosun fan in the 3x3 with a new occilating ac infinity fan.
The difference between a current gen 8 inch blower and a first gen 6 in blower is night and day. The 8 inch fully pulls the sides of my tent in on the 3rd lowest setting. The 6 was at full blast and wasn't enough to create that vacuum. Temps are also 4 degrees cooler.
Light is at 28 inches at 100%.
Res is running clean and has been easy to handle any small ph swings.
View attachment 323521View attachment 323522View attachment 323523
View attachment 323525

How do you get in there to defol etc?

 

[Lesso]

How do you get in there to defol etc?

I just pull out the ones in front and lift the light

 

[Lesso]

Nice man I can't wait to learn all about cloning and keeping mom's etc.....super dope grow man following for sure

Thanks. Yeah its similar to your grow. LEDs and ebb and flow buckets

 

[boo]

I can see why you got that mechanical trimmer… the garden looks stellar

 

[EbbnFlowr]

I just pull out the ones in front and lift the light

Sounds easy enough!

 

[Lesso]

I can see why you got that mechanical trimmer… the garden looks stellar

Exactly why lol

 

[Lesso]

Day 8
Had to raise the light some. Also cranked it up to 100%
Clones are kicking butt too.
Will defoliate again around week 3. An rearrange the plants as needed.

 

[Lesso]

Day 9
Killed 2 clones of #6. Parent plants structure is not ideal. Stretch period begins, starting to see flower clusters, I should see cotton balls soon.

 

[Lesso]

Day 10
Clones in the aero machine are yellowish. Refreshed the res with cloned ph 5.9. Refreshed the main res with 25 gallons of new solution. Ph 5.8. 1200 ppm/ 2.35 ec.
I'm seeing a bit of stretch. A few of the plants are staying small. So far I like #'s 10, 9, 7, 4, and 2. I have clones of all of them so that's good. Blue og is a beast an I have 4 well established clones. Trop is getting some light stress so I backed off abit.
Man crack is actually busting out tons of budsites. I didn't keep any clones though.
Cotton ball formation is beginning.

 

[Bubba]

Added a 8 inch fan and filter. Controller 69 pro, one more oscillating fan and will have them and the blower all hooked to the controller. I can't do the lights just yet because the sp250 won't daisy with the big light. No biggie.
I also replaced an old brokenish vivosun fan in the 3x3 with a new occilating ac infinity fan.
The difference between a current gen 8 inch blower and a first gen 6 in blower is night and day. The 8 inch fully pulls the sides of my tent in on the 3rd lowest setting. The 6 was at full blast and wasn't enough to create that vacuum. Temps are also 4 degrees cooler.
Light is at 28 inches at 100%.
Res is running clean and has been easy to handle any small ph swings.
View attachment 323521View attachment 323522View attachment 323523
View attachment 323525

Yup. I have Infinity 8 inch in my 4x4. Easily suck the sides in. You can hear the pitch of the motor change when door zipper is opened. Their 10 inch and larger work as whole house attic type fan!

Bubba

 

[Bubba]

Sounds easy enough!

My 4x4 has front "door" and both sides open as well. Still difficult at 6+ weeks of flower to get to everything. Moving front ones required.

Bubba

 

[EbbnFlowr]

Damn man loving this grow!

Do you guys have your inline fans running at all times? Right now I just have it set to turn on when It gets above 60rh...do you guys leave it on a minimum setting so its always on, then ramps up once it's triggered?

 

[Bubba]

Damn man loving this grow!

Do you guys have your inline fans running at all times? Right now I just have it set to turn on when It gets above 60rh...do you guys leave it on a minimum setting so its always on, then ramps up once it's triggered?

Mine runs constantly. Same with 6" infinity fans that move back and forth. I turn off the back and forth off at lights out, but fan stays on.

Bubba

 

[EbbnFlowr]

Mine runs constantly. Same with 6" infinity fans that move back and forth. I turn off the back and forth off at lights out, but light stays on.

Bubba

So what minimum setting do you have it set at? Is it always running at 1 or 2 then ramps up ?

 

[Lesso]

Damn man loving this grow!

Do you guys have your inline fans running at all times? Right now I just have it set to turn on when It gets above 60rh...do you guys leave it on a minimum setting so its always on, then ramps up once it's triggered?

Mine is on 8 at 80 degrees or if humidity climbs over 65. Otherwise it runs at level 3 as the min

 

[Bubba]

So what minimum setting do you have it set at? Is it always running at 1 or 2 then ramps up ?

Usually 4. I just let them go. I have the "deluxe" version of the Infinity fans, so they could be set up to be run like that. Others milage may vary, but if set to come on at certain temp and humidity levels, I find they run constantly anyway. Just something else to buy and fiddle with.

Bubba

 

[SubmarineGirl]

My in-line fan runs all the time. I do turn it up and down to adjust for temp and humidity during my grows but I keep it running pretty high once well into veg