Making vape liquid easy way

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Well so the premise of alcohol based tinctures is that you're going to use a higher temp similar to a joint where combustion occurs and it also eliminates the terps to a high degree.
You wouldn't need to decarb since you're using higher temps for the pen anyways or dabbing device.

So by using the vp/pg it's meant to be more volatile at a lower temps to preserve the terps.

It's awesome that you taste the terps! I've noticed a sharp fall off after 3 months of curing. I've heard other people saying that it gets better, but I highly doubt it. In the beer brewing industry, which I used to brew a lot of beer, the terps which were the same constituents as marijuana would notoriously fall off after 3 months in the case. This was highly influenced by light exposure, heat and time.
 
Bummer…well at least u have complete legalization 🎶😎🎶
Tru!!!!

In theory I could use rubbing alcohol which is cheaper than 190 proof everclear as long as the alcohols are completely boiled off.
The misconception of blindness from alcohol is directly in proportion to the total amount of isopropyl alcohol consumed. In general beer/wine brewing you do get a little isopropyl.
 
Use food grade alcohol if your going to consume.
 
I was to afraid to use alcohol based on reading up on accidentally getting it in your lungs if you somehow don’t burn it all off. I made a tincture with VG then added 50/50 Tuncture and PG and it burns fine in my pen. Was reasonably easy too. My son in law has been using it and says it works great. The vapor makes me cough maybe cause I don’t know how to use it so good. I usually smoke blunts or my glass blunt.
1659613541721.jpeg
 
I was to afraid to use alcohol based on reading up on accidentally getting it in your lungs if you somehow don’t burn it all off. I made a tincture with VG then added 50/50 Tuncture and PG and it burns fine in my pen. Was reasonably easy too. My son in law has been using it and says it works great. The vapor makes me cough maybe cause I don’t know how to use it so good. I usually smoke blunts or my glass blunt.
View attachment 305033
Well also they hit harder than the cheap disposable vape pens you get. Normally I take a huge hit from the cheap ones and mine I can only do 1/4 inhalation since it's so much more being produced
 
0% Residual Everclear alcohol when properly evaporated out of oil …(if you’re talking about isopropyl alcohol I would NOT use that anyways)…Not sure where people are reading this from but obviously this is disinformation & A lack of chemistry knowledge.
🎶😎🎶
 
0% Residual Everclear alcohol when properly evaporated out of oil …(if you’re talking about isopropyl alcohol I would NOT use that anyways)…Not sure where people are reading this from but obviously this is disinformation & A lack of chemistry knowledge.
🎶😎🎶
I'm a biochemist so I know my stuff. If you fully remove isopropyl alcohol then it's fine. I didn't say to use it just in theory as to get it 100% out wouldn't be that easy for the average person and isopropyl alcohol is rather toxic.

I said above that in my state we cannot purchase anything above 120 proof.
 
I'm a biochemist so I know my stuff. If you fully remove isopropyl alcohol then it's fine. I didn't say to use it just in theory as to get it 100% out wouldn't be that easy for the average person and isopropyl alcohol is rather toxic.

I said above that in my state we cannot purchase anything above 120 proof.
Understand, keep forgetting Everclear not available everywhere :(
 
I'm going to be selling off all my equipment for various reasons only in the Los Angeles area. If anyone is interested it's linked into the for sale part for $150 total and should provide you with at least 2 grow sessions including soil, seeds and nutrients. Killer deal if you're in the area
 
Hi guys I've been experimenting with making vape e-liquid. I don't have a press so this is the way in which I did it.

I got cures flower around 8 grams or so then baked them at 240 degrees (my oven fluctuates +/- 10-15 degrees). Decarb temp is around 248 for THC. Anyways I did this for around 40 minutes (probably can get away with less as they smelt a little burnt like popcorn) so next time I'll do 25 minutes.

I then did a very coarse pull apart with my fingers and placed them into a small jar and had just enough pg and vg in equal parts for which I then sous vided the jar at 180 degrees for 1 hour. I strained with cheese cloth and noted that it smelled like burn popcorn and thc vape(over toasted the flower). I added some terps and loaded it into my vape pen which costs $35.

Cheers!
Hi. I am new to vaping, and I am wanting to make my own cannabis E juice. I keep seeing conflicting instructions on how to go about this. I came across a video where the guy takes VG and PG and puts 80% VG and 20% VG, to make a total of 100ml of them both combined. He then put 10g of decarbed cannabis into the jar and stirred. He then boiled water in a pot, put the mixture (still in its own jar) into the hot water, and let it sit there for around 2-3 hours total. But 3 times in between, he strained the mixture through coffee filters. Does anyone know if this is actually a good way to make E juice? if not, can you recommend me anything or give me tips? I am trying to find a simple way to do this. I saw another method that includes alcohol, which I want to avoid doing.
 
Last edited:
Hi. I am new to vaping, and I am wanting to make my own cannabis E juice. I keep seeing conflicting instructions on how to go about this. I came across a video where the guy takes VG and PG and puts 80% VG and 20% VG, to make a total of 100ml of them both combined. He then put 10g of decarbed cannabis into the jar and stirred. He then boiled water in a pot, put the mixture (still in its own jar) into the hot water, and let it sit there for around 2-3 hours total. But 3 times in between, he strained the mixture through coffee filters. Does anyone know if this is actually a good way to make E juice? if not, can you recommend me anything or give me tips? I am trying to find a simple way to do this. I saw another method that includes alcohol, which I want to avoid doing.
1st off Any extraction method that doesn’t use extreme cold is going to have fats waxes and chlorophyll in the final product which you do not want for vaping… also you do not need to decarb or vaping only for edibles or drinkables.
Leaves your two choices one buy it from a dispensary or make it on your own using 190 proof alcohol…
Also you do not need to use any open flame if that is your concern you can let the alcohol evaporate off naturally and then poured into a small little Penzi glass spice jar you then put it on a coffee warmer and simply let it sit for a couple hours stir occasionally with a toothpick until all bubbles are out of it, The last hour of bubbles are just the water evaporating out the alcohol is long gone… ethanol is preferred by commercial distillers & food grade.
Here is what I do:
Great Article:

June 28, 2017
CANNABIS OIL QWET EXTRACTION BATTLE OF THE WASH: DRY ICE VS. FREEZER

((( Essentially ethanol at extreme cold temperatures still
removes cannabinoids, But the extreme cold temperature slows down to a crawl the extraction of lipids, waxes, fats & chlorophyll. You can remove as much as 30 to 35% of undesirables by utilizing -40/50f extraction temperatures)))

My technique Learned from above article:
My pure oil technique:
—Homemade (licensed MO Medical Cultivator)
I usually use about 12 ounces 190 proof Ethanol or Everclear to 1 ounce lightly ground very dry herb(low moisture content)…
25 minute mix soak time, after the Herb & Generic Everclear both in separate mason jars have cooled to
-50/-60f range in a sealed food cooler with Dry-ice on a screen above
herb & generic Everclear jar (dry ice gas evaporates downward as it is heavier than air, thus dropping
minus 115f temp over mason filled jars.)
Why so cold—““”You might say that the fats and waxes are slowed to an extraction crawl, but the Cannabinoid oils will extract at a fast past walk vs crawl— basically you’re just freezing everything out you don’t want !!!””
(extremely important to keep -50f or Minimum of -40f until “1st filtering”completed)””,
Of course alcohol and herb are in separate Mason jars at this point cooling down.… Once The alcohol and herb are sub cooled & combined (mixed in 1 jar) gentle stir 3 or 4 times during 25 minute soak, & shut cooler lid fast to keep mixture sub cooled…VERY IMPORTANT.
((4 Ozs of herb Max per run for me, Grind herbs using kitchen “glass peanut hand grinder”— comes out about twice the size of joint material or what ever u have to grind, I would not use a herb grinder, Personally I think it grinds it too small.
—1st Filtering: After soaking herb/alcohol…filter the alcohol extraction off “very fast” while still sub-chilled cold using 75um filter. (I use ice Hash bubble bags, they separate alcohol oil wash
“VERY” fast or use silkscreen material (Readily available),
filter into glass Pyrex bowl/dish. I find these Pyrex dishes used at Goodwill or Savors.
—2nd filtering into another Pyrex dish use a 25um filter (use the 25 µm bubble bag or a brown coffee filter which is also 25 µm, this removes the remaining sediment), Obviously the first filtering is the “most important” (remember the whole purpose of the super low freezing temperature is to isolate all of the “”fats, waxes, chlorophyll, & other undesirables
that you “DO NOT” want in your Vape oil.)
Now, Evaporate tincture in Pyrex dish using controlled temp hot plate (hotplate lab type stirrer is another option) or electric skillet with water added to skillet & Pyrex tincture filled placed on top—like a double boiler
(Or let it evaporate naturally in the sun covered with cheese cloth, and no you will not degrade THC In a short period).
I like to keep skillet temperature under 160f this keeps the alcohol usually under 140f… That temperature preserves many Terps, but I am not a Terp hunter !!!

((like my wife said on her very first Vape wow that taste good))

“”MUST Have Fan”” on & blowing over dish if utilizing heat,

NO NO NO open flames… keep well ventilated with

fan fan fan…

&

When the alcohol mixture has reduced to a couple of ounces, pour it into a very small glass thick jar that you plan on storing the oil in. Use a silicone spatula to move all the liquid into the jar…

(Like a used Penzi spice jar I love these little easy to access thick glass jars)…

(you will also use this jar to remove all of the remaining alcohol and whatever water is in it, I do this by putting it on the hot plate of my coffee machine or a skillet keep temperature under 160°, this is the “longest”process step because you occasionally stir the oil with a toothpick to see if there’s …“any any any” micro bubbles, if so you are “not done”… can’t stress this enough…!

Have patience, because you are not done until those micro bubbles are gone and I mean micro !

(for those of you that want to argue,

food grade alcohol & water pickup is 100% evaporated @ this point).

Done



Results:

Pretty much comes out the same every time

4–4.5 Gr net pure GOLDEN oil per Oz. 15.5% return, basically free of undesirables -fat, wax , chlorophyll, other Lipids, etc.(After reading commercial manufacturers literature & many other related articles, I’ve estimated that 90 to 95% of undesirables have been eliminated from the final oil— The difference between normal room temperature extraction versus super chilled extraction is about

6.5-7 Gr VS 4-4.5 Gr, thus you’ve eliminated 2.5 Gr by weight 30-35% of undesirables…! ;)

Estimated oil potency using Garden of Green GSC autoflower strain

(22% Thc) is

70/80% Thc

Again estimated

😎💨🤪

Very nice warm relaxing long lasting lift.

Done



Notes:

What’s needed:

—large or medium mason jars (or other glass containers you want to use) to sub cool herb & alcohol separately (I prefer large quart size for any size application)

—Herb any qty ?

— generic Everclear

(or any 190 proof food grade alcohol only) 11-12oz per Oz of herb

—Food Cooler Big enough for your application.

(I use a 20” deep x 18”plastic insulated cooler)

— 10 pounds of dry ice

(8 pounds minimum for 1-2 Oz herb & about 10 to 12 pounds for 3-4 oz. of herb,

-40f is the “LOWEST” ultimate target temperature, But as stated I use -50 /-60, depends how patient I am that day. It will take several hours to get this temp)

—Metal screen or grate To hold the dry ice above the herb & alcohol, (or kitchen Sieve), but as close as possible when in cooler, Why ?

dry ice sublimation Co2 gas sinks, because it’s heavier than air!

So do you want that cold CO2 air @ of

-107 f falling over your jars… yes u do.

(Home Depo etc sells those cheap aluminum screens for your grill u can use to put The dry ice on & suspended above your jars)

— silicone stir spatula

(silicone is your “friend”when dealing with cannabinoid oil’s, don’t do this unless you have one!!! Seriously sticky oil sucks)

— small glass storage jar

(I prefer the small Penzi spice type jars, easy to heat up stir & easy to use a syringe for removing oil when filling Vape carts)

— plastic syringe for Vape cart filling (always wash syringe out with Everclear immediately when done, & save it, it’s still good, makes a mighty powerful cocktail… peanut butter banana orange juice smoothie is excellent.

I’ve actually figured out the syringe will hold about 1/10 to 2/10 of a gram of residual oil after you’ve used it to fill carts! …which can be about 100-200 mills potency And depending on tolerance can be 2 to 4 liquid doses. So tread lightly!!!

—C Cell type Vape carts

$3-5.50 ea.,

(CCells have 4 -2 mm size oil absorption holes, which is great for thick Hash Oil’s)

—Vape adjustable PIN Battery

(Vision Carbon Spinner 3

is cheap $8-18 ea.,

adj PIN to 3.7 Volts so carts don’t burn out & You do not overheat oil)



((One last comment. If you did the above process at “”room temperature””,

Your yield would be about 6 1/2 to 7 1/2 g of oil per Oz.

30–35% more…

Why? You are picking up everything out of the plant cannabinoid oil’s(like Rick Simpson oil) fats, waxes, chlorophyll, and other undesirables, which in all reality is just fine if you only plan on using it for edibles or gelatin capsules, but it clogs up Vape carts very easy & has reduced potency.))

Again no flames needed, just cover alcohol with chefs cloth keep dust out and let it evaporate naturally, but do you recommend the coffee warmer place at the end to boil off the residual water…190 alcohol is 10% water.


screen-shot-2016-02-17-at-5-23-48-pm.png


Minus -50f Hash Oil Pics

Image.jpeg
 
Lord God that's a lot of directions. I'll just decarb and eat.😁
 
Good informative post Extractminussixtyethanol. Only thing....you need a nickname. So, you could come up with your own or our resident Avatar assigner Roster can come up with one for you.....ha ha. Vaper sounds nice but I am sure you have a better one. I have a bad memory and trying to remember how to spell your user name is to much for an O'l man like me........
 
Lots of info there extract. I’ve always been afraid to vape the stuff made with alcohol I’ve made the VG PG kind which worked but made me cough to much. Maybe I’m smoking it wrong. I smoke cigs and reefer but for some reason, can’t tolerate the vape juice.
 
Lots of info there extract. I’ve always been afraid to vape the stuff made with alcohol I’ve made the VG PG kind which worked but made me cough to much. Maybe I’m smoking it wrong. I smoke cigs and reefer but for some reason, can’t tolerate the vape juice.
The pure oil won’t make you cough unless you inhale to much…& of. CBourse the Thc expansion will make you cough I add nothing no pg, peg, etc to the oil before filling up CCell.
cartridges.
I always activate my pen battery for one and a half seconds before I take a hit, and then I only inhale for less than two seconds to prevent THC expansion /cough.
My lungs always feel 100% better when I vape versus smoking.
I have tried the dispensary have a boil cartridges 70 8090% THC and all they do is make me cough, not sure what they have in them, but it sure the hell isn’t pure.
 
Good informative post Extractminussixtyethanol. Only thing....you need a nickname. So, you could come up with your own or our resident Avatar assigner Roster can come up with one for you.....ha ha. Vaper sounds nice but I am sure you have a better one. I have a bad memory and trying to remember how to spell your user name is to much for an O'l man like me........
How about Redeye ?
I couldn’t figure out how to change it if you can do it automatically be great do you have my permission…😎
 
The pure oil won’t make you cough unless you inhale to much…& of. CBourse the Thc expansion will make you cough I add nothing no pg, peg, etc to the oil before filling up CCell.
cartridges.
I always activate my pen battery for one and a half seconds before I take a hit, and then I only inhale for less than two seconds to prevent THC expansion /cough.
My lungs always feel 100% better when I vape versus smoking.
I have tried the dispensary have a boil cartridges 70 8090% THC and all they do is make me cough, not sure what they have in them, but it sure the hell isn’t pure.
Will the pure oil method you describe work in the sub-ohm pods?
 
The pure oil won’t make you cough unless you inhale to much…& of. CBourse the Thc expansion will make you cough I add nothing no pg, peg, etc to the oil before filling up CCell.
cartridges.
I always activate my pen battery for one and a half seconds before I take a hit, and then I only inhale for less than two seconds to prevent THC expansion /cough.
My lungs always feel 100% better when I vape versus smoking.
I have tried the dispensary have a boil cartridges 70 8090% THC and all they do is make me cough, not sure what they have in them, but it sure the hell isn’t pure.
I tried vaping to quit smoking. They all made me cough I thought it was all the flavor additive and chemicals used in them. I didn’t like the flavors and they didn’t make a Marlboro light flavor. They laughed at me when I asked for a plain vape pen with nothing in it But vapor.
 

Latest posts

Back
Top