GrowinGreen
♥ ςticky icky
- Joined
- Feb 26, 2009
- Messages
- 791
- Reaction score
- 743
Well I finished making my bubble cloner today and thought I would post the finished product. It was definitely easy to make. I already had a few of the materials at hand and the total cost was about $20. It holds 10 clones and I really like the size of it, small enough to move around easily and it doesn't use a lot of water. The cheap air pump from walmart is also surprisingly quiet and efficient.
Materials:
Sterlite container
Air pump
Airstones
Black tubes
Gorilla tape
Drill and holesaw
Neoprene collars
I took solarz advice and bought a 'T' connector to make the dual output pump into a single output which pushed out much more air to the 2 airstones.
Tell me what you think and if you have any questions just ask!
Materials:
Sterlite container
Air pump
Airstones
Black tubes
Gorilla tape
Drill and holesaw
Neoprene collars
I took solarz advice and bought a 'T' connector to make the dual output pump into a single output which pushed out much more air to the 2 airstones.
Tell me what you think and if you have any questions just ask!