ChatNoir
Well-Known Member
- Joined
- May 21, 2008
- Messages
- 571
- Reaction score
- 548
Required Materials
PVC Pipe
Case Fan
Sockets
Wire
Matte White Spray Paint
Plate -Preferably MDF-
5x10cm Wooden Plates
Workshop Tools
I have made this reflector for Omlight spiral compact fluorescent lamps so tweak it according to your needs. Cut 20cm of PVC pipe and cut it half in order to make two half tubes. Then clean it, after cleaning wash them and dry them. The next step is painting, paint your wooden plate and PVC pipe to white, if you want neatness polish plate with sand paper after it dries and paint it again.
Drill a huge hole in the middle of plate and screw down your case fan on the unpainted side of your plate, fan will suck up the hot hair and exhaust it to the upper portions of grow space in order to keep lower portions cool and neat.
Wire and screw down your sockets on the wooden plates as it is shown in photograph. Completed and in progress of process is also shown in photographs. Complete wirings and hang your reflector. I used rope and pulley system, your choice is up to you.
PVC Pipe
Case Fan
Sockets
Wire
Matte White Spray Paint
Plate -Preferably MDF-
5x10cm Wooden Plates
Workshop Tools
I have made this reflector for Omlight spiral compact fluorescent lamps so tweak it according to your needs. Cut 20cm of PVC pipe and cut it half in order to make two half tubes. Then clean it, after cleaning wash them and dry them. The next step is painting, paint your wooden plate and PVC pipe to white, if you want neatness polish plate with sand paper after it dries and paint it again.
Drill a huge hole in the middle of plate and screw down your case fan on the unpainted side of your plate, fan will suck up the hot hair and exhaust it to the upper portions of grow space in order to keep lower portions cool and neat.
Wire and screw down your sockets on the wooden plates as it is shown in photograph. Completed and in progress of process is also shown in photographs. Complete wirings and hang your reflector. I used rope and pulley system, your choice is up to you.