MrFilthyBuds
Member
- Joined
- Apr 6, 2006
- Messages
- 5
- Reaction score
- 0
[font="]I have grown before a couple of years ago and did pretty well for myself, small grow though, 4 plants , now I am upgrading to a place where I can expand my hobby. The room is approx 20X20 and I would like to house all necessary items (ballast, fans etc inside) I have read a lot about SOG, ScrOG and Super cropping (topping) but now my resource (OG.com) is gone and I can't look all that stuff up again and no one has a guide like they did, pity we lost it.
Anyway, I am curious what overall is going to produce the most because I havent seen a bunch of comparisons on all of these to base my decision off of. I am able to master advanced techniques as my first grow was Aeroponic in nature which was "the shit" at the time. Aero wasnt too bad, but I seemed to have a lot of nozzle problems. Possibly my neglect to initially clean the system up or something, I dont know, seemed like I worked the bugs out of it after a long enough time though by mid flower I hadnt worried about anything but switching the nutes for some time I recall.
So, could someone please help me understand with a little more depth what is going to be the winning combo?
Here are the factors I am concerned with:
Time (grow time)
Medium (Aero, NFT, ebb/flood, bubblers)
Output (end result dry product)
Methodology (SOG, ScrOG, Topping/Super cropping, natural)
[/font]I am curious what people think is the best use of my space is, in the regards to the methodology. I can allow up to 4-5 foot tall plants, What is going to maximize its potential?
[font="] Can anybody shed some direct comparisons on the mediums and their relation to grow time/quality of product?
As well as some comparisons between the methodologies I mentioned for pruning/training the plants and their relation to end product?
Sorry if this is a repeat question, I havent seen (I searched) anything like this, the same things like, this is good for enclosed space or speed blah blah blah, but nothing comparing them all in a space of my size (2 car Garage / 20ftX20ft, probably grow area of around 100-200 ft square). Plant numbers are not a factor.
Thanks in Advance, I look forward to being an active participant in this community and putting up a journal of my progress
Mr. Filthy
Update: I think its better to add what I am thinking here than it is to post below, so you dont have to read through all the shit.
[/font]I like that idea. I plan on bumping 2,3 or possibly 4 differing strains and rotating them so I have a harvest going on every month depending on conditions and strain.
I am thinking I will probably like to do a Table of Aeroponics, using a topping method to just satiate my need to watch something grow a few feet a week.
I am also debating now what my other main tables will be. I want the next best thing to Aero in speed, I am reading up and I think that is probably NFT or something.
Anyway, I am curious what overall is going to produce the most because I havent seen a bunch of comparisons on all of these to base my decision off of. I am able to master advanced techniques as my first grow was Aeroponic in nature which was "the shit" at the time. Aero wasnt too bad, but I seemed to have a lot of nozzle problems. Possibly my neglect to initially clean the system up or something, I dont know, seemed like I worked the bugs out of it after a long enough time though by mid flower I hadnt worried about anything but switching the nutes for some time I recall.
So, could someone please help me understand with a little more depth what is going to be the winning combo?
Here are the factors I am concerned with:
Time (grow time)
Medium (Aero, NFT, ebb/flood, bubblers)
Output (end result dry product)
Methodology (SOG, ScrOG, Topping/Super cropping, natural)
[/font]I am curious what people think is the best use of my space is, in the regards to the methodology. I can allow up to 4-5 foot tall plants, What is going to maximize its potential?
[font="] Can anybody shed some direct comparisons on the mediums and their relation to grow time/quality of product?
As well as some comparisons between the methodologies I mentioned for pruning/training the plants and their relation to end product?
Sorry if this is a repeat question, I havent seen (I searched) anything like this, the same things like, this is good for enclosed space or speed blah blah blah, but nothing comparing them all in a space of my size (2 car Garage / 20ftX20ft, probably grow area of around 100-200 ft square). Plant numbers are not a factor.
Thanks in Advance, I look forward to being an active participant in this community and putting up a journal of my progress
Mr. Filthy
Update: I think its better to add what I am thinking here than it is to post below, so you dont have to read through all the shit.
[/font]I like that idea. I plan on bumping 2,3 or possibly 4 differing strains and rotating them so I have a harvest going on every month depending on conditions and strain.
I am thinking I will probably like to do a Table of Aeroponics, using a topping method to just satiate my need to watch something grow a few feet a week.
I am also debating now what my other main tables will be. I want the next best thing to Aero in speed, I am reading up and I think that is probably NFT or something.