urgent attention please!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

passtheswag

smoke it up !!!
Joined
Jun 30, 2007
Messages
111
Reaction score
45
stoped at a buddys to check things out this is what i found !! 40 days flower,temp 80,humidity 70,rain water has been used all during flower with a ph of 7, under a 1000 watt super asgro hps ! any ideas?

Camera Picture 1.jpg


Camera Picture 2.jpg
 
he uses shultz~s super bloom 10 54 10 once a week i also use it with no problems
 
also these plants were severly burned when first put into flower new light was to close so alot of upper fan leaves had to be removed
 
to hot and not enough air! more water please! lower humidity also
?my 2 cents-

poor little buggers>?!!
 
I definitley think its a PH problem Hydro should be around 5.5-6.0 never more...Are you doing Hydro? Soil?
 
PH 2 high.. drop it to 6 or just under

Nutes 2 high... Flush her for 3 to 7 days (IMO) then start back at 800ppm

you should be good
 
oh and 70% Hum means theres not enough air flow. they need fresh air with Co2 in it so they can take in the Carbon.. 70% Hum can only come from little or no air movement (basicly sufficating plants to death).. throw a fan in there and if posable a fresh air supply.
 
Fix ph first. It doesnt look like heat burn though.
Usually when plants are in flower the leaves turn yellow b/c the plant uses all the energy to produce the budz.
 

Latest posts

Back
Top