papabeach1
Well-Known Member
- Joined
- Jul 10, 2008
- Messages
- 2,081
- Reaction score
- 1,211
*sigh* I know I know here I go again!!!!
ha...
man after I seen andy bought his hotbox... I was kinda jealous...
but again.. I said to myself.. heck with that.. I know I could do it ...
I thought about cut the glasses from malt beer glass bottle.. but... don't have the tool to cut the glass ...
anyway I did tried it with lemon thyme seeds.. it seem works I didn't want to waste mojos... but I don't think it works properly.. but do need all of your help to get it fix it properly please correct me how to fix it correcly..
just that I want this 2 cent to be success for anyone to make and try it ...
what I did has to fix it up
solder weld, broken yakoo vase, half inch clear tube, baby formula powder can (empty can), light dimmer (to control the heat) plumber putty (for air tight purposes), and at last 2 liter pepsi bottle.. the bowl/nozzle came from my air gauge cutted off..
I did put the screen in that nozzle and tested it out.. it took a pretty while to heat it up.. what did I do wrong? does it need nice metal plate to connect the end of solder weld?
if I get this success. I will put a nice thread how to do it step by step..:hubba:
ha...
man after I seen andy bought his hotbox... I was kinda jealous...
but again.. I said to myself.. heck with that.. I know I could do it ...
I thought about cut the glasses from malt beer glass bottle.. but... don't have the tool to cut the glass ...
anyway I did tried it with lemon thyme seeds.. it seem works I didn't want to waste mojos... but I don't think it works properly.. but do need all of your help to get it fix it properly please correct me how to fix it correcly..
just that I want this 2 cent to be success for anyone to make and try it ...
what I did has to fix it up
solder weld, broken yakoo vase, half inch clear tube, baby formula powder can (empty can), light dimmer (to control the heat) plumber putty (for air tight purposes), and at last 2 liter pepsi bottle.. the bowl/nozzle came from my air gauge cutted off..
I did put the screen in that nozzle and tested it out.. it took a pretty while to heat it up.. what did I do wrong? does it need nice metal plate to connect the end of solder weld?
if I get this success. I will put a nice thread how to do it step by step..:hubba: