Aurora_Indicas_Dad
Legalize it in U.S.A.
- Joined
- May 12, 2008
- Messages
- 1,468
- Reaction score
- 1,419
hi thanks for comin to check out my thread.i decided to just go with batwing reflectors for my two 600 watt hps grow lights.i have 2 of the hurricane lamp shades from hobby lobby.im planning on buyin two or three of the 6 inch 250 cfm inline duct fans.was wonderin if anybody thats good w/ paint could draw me up a picture on the most logical way to run my flexible duct from my hurricanes/fans.i need the 2 be length wise due to the fact my system is 8 1/2 feet long,and 3 1/2 ft wide.(this is an igs sytem with my ststem i made myself for 10 hand fed plants at the end of it) total length is 8ft 6in. my room is 9ft wide and 11 ft long.with 1 window at the far end of the room.heres what i did on paint.what do ya think?
thanks as always for any help suggestions i can get on this.itd be easier to buy one hood that has an air cooled enclosed hood with the 2 openings on each end,but with havin 2 bat wing reflectors,i will need two ducts goin,or know there the most logical place to put the 6'' Y would be.
come on ladies and gentleman,its gettin close to showtime for me and am confused on the best way to set this ducting up for these hurricane cool tubes.
thanks alot for any help -peace P.s. hopefully this uploads this paint blueprint i did,not sure if i have to resize it or not
thanks as always for any help suggestions i can get on this.itd be easier to buy one hood that has an air cooled enclosed hood with the 2 openings on each end,but with havin 2 bat wing reflectors,i will need two ducts goin,or know there the most logical place to put the 6'' Y would be.
come on ladies and gentleman,its gettin close to showtime for me and am confused on the best way to set this ducting up for these hurricane cool tubes.
thanks alot for any help -peace P.s. hopefully this uploads this paint blueprint i did,not sure if i have to resize it or not