here the info you need
hXXp://www.ohp.com/Labels_MSDS/PDF/floramite_label.pdf
MIXING INSTRUCTIONS
Fill the spray tank with 1/2 the desired amount of water. Then add
the required amount of FLORAMITE SC with agitation running to
fully disperse the product. Then fill the tank with the remaining
amount of required water.
Like many pesticides, FLORAMITE SC stability can be impacted
by high pH and high temperature. For optimum performance,
maintain spray mixtures containing FLORAMITE SC within a
range of pH 5.5 to 6.5.
Compatibility: To obtain broad spectrum insect control,
FLORAMITE SC can be tank-mixed with other insecticide
products. However, due to variations in water quality, e.g.,
hardness and pH, it is required that users conduct small
scale trials under local conditions to ensure compatibility
prior to any large scale use.
Restrictions: Tank mixtures are permitted only in those states
where the tank mix partner is registered. When tank mixing, follow
the label directions for the most restrictive of label precautions
and limitations.
USE RATES AND APPLICATION INFORMATION
Mix 4 to 8 fluid ozs. FLORAMITE SC in 100 gals. of water (1⁄4 -
1⁄2 tsp./gal) and apply as a full coverage spray to the foliage
using a volume of 1-4 qts. of final solution per 100 sq.ft. (or 100 -
400 gals. per acre). Actual spray volume will vary depending on
the size of plants being treated. Application should be made as
soon as mites appear and will provide residual control for up to
28 days. Use the low rate for preventative applications or where
mite infestations are light. The higher rate may be required for
heavy infestations or for extended residual control. For optimum
coverage of ornamentals with hard to wet foliage, an adjuvant
can be added to the FLORAMITE SC/water solution. Those
found to be effective are Silwet 77® or Sylgard 309® at 4 oz. per
100 gallons of water. Users should test safety and compatibility
of all adjuvants prior to commercial use. Do not use adjuvants in
solutions applied to greenhouse tomatoes.
When used as a directed, FLORAMITE SC is effective for the
control of a variety of mites species, especially spider mites, red
mites and grass mites. NOTE: It is not effective against rust
mites, broad mites and flat mites. FLORAMITE SC is primarily
active on the motile stages of mites, but also has ovicidal activity
against spider mites (Tetranychus species). Common mite
species controlled by FLORAMITE SC include:
RESTRICTIONS:
For greenhouse tomatoes, do not apply within 3 days of harvest.
Do not make more than two (2) applications of FLORAMITE SC
per crop per year.
Do not apply more than 32 fluid ozs. per acre, per year.