StonedCold
Well-Known Member
- Joined
- Nov 7, 2006
- Messages
- 143
- Reaction score
- 10
I purchased a 265 CFM blower recently, hoping it would solve my lack of ventilation problem, but it has failed. I was wondering the reason, and the only thing I could come up with was that my hood on the HPS is open on the sides, and heat escapes out all sides and rises as well as is pushed down from the light. Is there anyway to fix this problem with a DIY touch on my hood, or should I seal off the room almost completely, and hope the temperatures don't go above 93 levels, which they are at currently with the blower....
4X3X8 = grow area
400 HPS light
Give me something please!!
4X3X8 = grow area
400 HPS light
Give me something please!!