zem
Well-Known Member
- Joined
- Dec 6, 2009
- Messages
- 3,521
- Reaction score
- 1,375
i had a problem with the burner, it would shut off the breaker when put on, i figured there was some burnt piece and it turned out to be the transformer of the electrodes, had it replaced, and then tried to bleed the furnace. at first it wouldn't bleed, so i removed and cleaned the dirty filter, put it back on, so now the oil flow was good, but it took a lot of bleeding and the oil was pouring out but would not reach the nozzle, so i figured that i had yet more dirt between the filter and the nozzle. and then comes the mind blowing part, i took a lunch break and thought that after that, i would strip that thing apart for cleaning, so when i came back, i tried one more time to bleed it, but, this time, it wouldn't bleed! just like it was before cleaning, and it started to get messy, as i became tired from crouching down, i removed the filter off and on like 3 times took every screw out cleaned it all, checked if there it oil flowing when i open the oil valve and the flow is great. i have no clue what the hell is wrong with this thing. i have no problem changing the filter, but really, i worry to go buy some useless piece, only to find out that it was something that i missed that was wrong, as it looks as if it is new. that repair took a lot of energy out of me, it really really sucked and it still hadn't worked. Anyone with helping info please?