I've watched the discussion of using molasses to aid in growing with lots of interest.
However, using raw molasses IS NOT the best method in which to arrive at the desired end of plant enhancement.
The below information is collected from a site that discusses using molasses as the primary ingredient in the fermentation of EM, (Effective microorganisms).
If you use molasses in it's raw form, you're in the s-l-o-w lane. You're requiring it to ferment while in your plant medium. This is not an efficient manner to use it.
Check out this information and if you're interested, the additive EM is available from many sources including the one that I quoted.
Basically, the purchased EM is added to warm water and molasses. It's kept at 85-95 degrees F. for 4 days or until the pH drops below 4.0
It's then added in a ratios of anywhere from 1:1,000 to 1:10,000 to either dirt or hydroponic solution to accomplish the great things it does. Please read the entire page that this comes from before using it for specific applications. The ratio for your use may differ from that of another user.
Here's the information:
*****
History of EM
Throughout the 1970s and 80s Dr. Higa pioneered the research that led to the development and commercialization of EM technology. This natural and organic biotechnology has since been successfully commercialized throughout world markets in human health, agriculture, livestock and industrial waste treatment. Thousands of research and efficacy studies have been conducted and documented in projects, conferences and books around the world.
Originally, EM was developed for use in agriculture (crop farming) as an alternative to agricultural chemicals such as pesticides and fertilizers. EM however is not a conventional fertilizer and unlike the purpose of fertilizers, the purpose of EM is to increase the number of beneficial microorganisms in the soil. This improves the soil's microbial health and promotes a healthy environment for plants. It can also be used as a processing tool to manufacture organic fertilizers.
Effective microorganisms, often abbreviated as "EM", is a generic and descriptive phrase and acronym to describe the theories, technology and applications of beneficial microorganisms, such as phototrophic bacteria, yeast, lactic acid bacteria and actinomycetes.
This technology is all natural, utilizing beneficial and effective microbes to repopulate environments with healthy microorganisms. It is a natural and organic technology that has been found to be useful in numerous ways to benefit mankind.
When applied in agriculture, EM increases the microbial diversity of soil, thus, enhancing growth, yield, quality, and disease-resistance of crops. EM cultures do not contain any genetically modified microorganisms. EM is made of mixed cultures of microbial species that occur naturally in environments worldwide but which have decreased in many soils due to over-farming, and chemical fertilizer and pesticide use. The principal microorganisms in EM are:
A. Photosynthetic Bacteria
The photosynthetic or phototropic bacteria are a group of independent, self supporting microbes. These bacteria synthesize useful substances from secretions of roots, organic matter and/or harmful gases (eg. hydrogen sulphide), by using sunlight and the heat of soil as sources of energy. Useful substances developed by these microbes include amino acids, nucleic acids, bioactive substances and sugars, all of which promote plant growth and development. The metabolites developed by these microorganisms are absorbed directly into plants and act as substrates for increasing beneficial populations.
Seed Treatment:
Gardeners may want to try soaking seeds in a solution of EM before planting to increase seed viability. Dilute EM with water at 1:1000. Soak seeds in solution for 5-10 minutes and no longer. Air dry and plant as usual. Experiment with small batches before treating larger quantities. Weak seeds and soil conditions may lead to decreased results.
Nursery / Container-grown Plants:
Inoculate with EM at seeding and transplant stages, then on a monthly basis thereafter. Use the standard dilution of 1:1000. Orchid growers have achieved good results by inoculating with EM immediately after planting in sterile media.
Hydroponics:
In hydroponic crop production systems, EM can be diluted with the nutrient solution at a rate of 1:10,000. This practice will coat the root systems with beneficial microorganisms and make nutrient uptake more efficient.
Grain Crops, Vegetables, Fruits & Herbs:
Spray the standard dilution of 1:1000 onto the plants. If introducing EM into an irrigation system, the dilution should be increased to 1:10,000. Apply as a pre-planting treatment, again at planting/transplanting and every three to four weeks during crop growth. Apply also to crop residues after harvest, just before incorporating residues into the soil. Use 1 gallon of activated EM per acre, diluted with the appropriate amount of water for each application.
Activating EM (AEM)
There are probably many places where you can buy EM. The place this information was harvested from is:
http://www.scdworld.com/shop/product.cfm?product_id=040111
This product, combined with the fermentation of a molasses based solution results in the Activated EM that is very good for plants.
The primary reason to activate EM is economy, not efficacy. It is perfectly acceptable to use EM without activating it. However, adding a sugar source and culturing the microorganisms ensures that the microbes are active. Once the following procedure has been followed, the end result will be a full strength culture of EM that can then be diluted and applied. Materials: airtight plastic container, or large tank, 1 part EM, 1 part blackstrap molasses, 22 parts water. 3/4 cup EM, 3/4 cup molasses in 1 gallon of water.
Procedure: Dissolve molasses in warm water and add EM. Activating EM is a mostly anaerobic process, thus the presence of excessive oxygen is not desirable. Keep the extension as warm as possible. If you keep the EM between 85-95 degrees it should activate in approximately 4 days. If the extension is kept between 70-80 degrees then allow for 5-7 days.
Depending on technique and extension conditions, it may take anywhere from 4-14 days. Check the pH to ascertain when the process is complete; EM is ready when the pH drops to 3.7 or below. Do not use EM that has not dropped below 4.0. If your pH continues to drop to 3.0 or even 2.0 this is normal and indicates high microbial activity. The end product should smell slightly sweet and pickled. Activated EM, unlike EM, is best used within 7 days. It may last up to 1 month but should be used within this time. Do not extend an EM extension - the results cannot be guaranteed.